Slide background

Start Set

Gateway + Temperature sensor

can be expanded with many other wireless sensors

Slide background

Is the fridge set cold enough?

Slide background

Must the plants be watered?

Slide background

Is water leaking from the washing machine?

Slide background

Are the fish doing well in the aquarium?

Great App for Apple (from iOS 7) and Android (from Android 3.2)
The self-explanatory graphical user interface of the app is operated intuitively and can be customized to suit your needs. Insert an own name for each wireless transmitter and select specific alarm limits. If this alarm limits are exceeded, the wireless sensors will report the disturbance immediately to your smartphone and hence offer the PLUS in security. Below is an overview of the features of the app.
Read more
 
View of the app
The notification number on the icon of the app gives you information on the number of currently active alarms.
Read more
Overview
You can see the sensors that you have added in the overview. There you can select different sensors, to change the name of certain sensors, to set individual alarms, to add a new sensor or to delete the sensor. In the lower area you will find settings and info. If an alarm is set for a sensor, a dot appears right of the sensor symbol in the overview.
 
Yellow area in the overview
A sensor will be displayed with a yellow area, if the battery of the sensor needs to be changed or if the server didn't receive any data from the relevant sensor for more than 15 minutes.
Read more
Red area in the overview
A sensor will be displayed with a red area, if an active alarm is received of one or more measurement values of the sensor.
Read more
Orange area in the overview
A sensor will be displayed with an orange area, if an active alarm was received and the requirements for this alarm were no longer met after the last update. (Measurement values are back in the normal area)
Additionally, a push notification will inform you of the cancellation of the alarm.
Push notifications
You need to allow the receiving of push notifications under "Settings -> Notifications".
Read more
Menu "Edit"
Touch the area "Edit" to reach the editing menu. Touch the area "Done" to finish the edited settings.
Read more
Add new sensor
Touch "Add new sensor" and subsequently scan the QR code on the backside of the sensor.
Read more
Update sensor data
Touch the area of the round arrow on the upper right to update the sensor data ...
Read more
Update sensor data
... or pull the whole display down with a finger.
Read more
Menu "Sensor"
Touch one of the sensor areas in the overview to reach the sensor menu. Touch the area "Back" or "Overview" to finish the edited settings.
Read more
History of recently occurred values
Scroll down to view the recently occurred measurement readings.
Please touch the "History" area to view a history for a whole day, as a selection from the past 90 days.
Read more
State of the battery
The current status of the battery of the selected channel is displayed above this field ...
Read more
State of the battery
... If it is necessary that the battery of the sensor has to be changed, the sensor in question is displayed with a yellow box in the overview. In addition, the status of the battery is marked with "Change".
Read more
Alarms
Touch this area to display previously occurred alarms.
Read more
Changing the sensor title
Touch the current title next to the pencil icon to change the title.
Read more
Adding an alarm
Touch the "Add alert" area to add an alarm.
Read more
Setting the alarm
DAlarms can be activated by touching of the respective switch areas. The alarm is activated, when the switch is set to the right and the switch background is green. Touch the respective area on the left next to the pencil icon to set the value of alarm temperature. The following alarms are possible: minimum, maximum and range. Please note that it is not possible to have more than one of the alarms per sensor enabled at the same time. Please use the alarm "range" if a maximum and a minimum temperature are to be monitored simultaneously.
Read more
History
Touch the highlighted box to view the history of an entire day, as a selection from the past 90 days. You can select the date of the desired day in the selection menu. Then tap again on "Select history of the last 90 days" and the data of the selected day are loaded.
Read more
History
All measurements of the selected date will be displayed to you (a complete day).
Read more
History
You can tap a line of history with your finger and get additional information about the alarm settings valid at the time of generation of the record.
Read more
Settings
You can adjust the following parameters of the app in the settings:
  • specify "Overview" as the start screen of the app
  • disable the idle state of the device
  • the unit of the displayed temperature values
  • time and date settings
  • configuration of the gateway
Important: You have the option to manually configure the gateway in the "Settings" menu (e.g. if your network doesn't include a DHCP server).
Back